Dealing With Obstacles When Tinting Windows

Hey guys,
Here Is Another Car Window Tinting Tip

Ok, today I will try and address a little problem that you will come across when you begin to tint car windows.

Whilst laying your window film onto the back glass of the vehicle is straight forward enough, dealing with the rear window wiper can be a pain in the ass!
If you are not careful you will easily crease the film in that area if you let the rear wiper hit the film when you least expect it.

So one simple tip is too use a piece of masking tape and use this to tape the wiper up, so it leaves space so you can still shrink the window film without fear of the wiper dropping down and hitting the film.
i made a quick video showing how to do it - its  simple thing buy maybe one day you will be able to use it.
Be aware that on some cars, you may need to remove the rear wiper and even the rear wiper motor assembly to get the job done right, cars that spring to mind here are the Mk 1 Honda CRV and the Mitsubishi Evo. On these cars, by leaving the wiper motor spindle in position will make the job a real pain and the few minutes it takes to strip it out will save you a lot of heartache.

One other thing i wanted to touch on was removing the actual wiper from the wiper motor spindle, this is something i rarely do, a lot of the wiper motor spindles have a tapered spline and over time the wipers can become seized, there are special tools available that make removal easier but my advise is work around it if you can.

Car Window Tinting For Beginners